Precibalance. B-52 SIPCOT, Irrungattukottai, Sriperumbudhur,
Chennai-602105 India
91-9789055141(sales) 91-9789055144(service)
send
Email
| |
- Q) Which make of Balancing Machines can be upgraded?
- A) All makes of balancing machines can be
upgraded.
- Q) Can a soft bearing balancing machine be upgraded?
-
A) Yes. On Up gradation, the soft bearing machine
becomes
hard bearing balancing
machine.
- Q) What Should be the condition of the old machines
-
A) Old machine should be mechanically and
electrically functional. The rollers should have eccentricity below 8 microns
for G2.5 grade quality balancing and below 3 microns for G1 grade balancing. All
the movements should be smooth. Motor and drive should run smoothly and with
less noise. If not, recondition the mechanical and electrical parts as required.
- Q) How do I test eccentricity of roller?
- A) Measure as shown in the photograph.
|
- Rotate the roller gently / slowly. The
eccentricity should be below 8 microns for G2.5 grade machines and below 3
microns for G1 grade machines.
- In case you need to service the roller,
change the bearing. Regrind the outer diameter. You need to provide radius
/ curvature on the outer surface of the roller. A camber diameter of 200
mm will be adequate for most applications.
|
- Q) My Present balancing machine is single speed. Can
I upgrade it to a multi speed balancing machine?
- A) Precibalance electronics is a all speed
electronics with seamless calibration capability. You can upgrade a balancing
machine to multi speed machine with ease.
- Q) When I upgrade my present balancing machine, from
single speed to multi speed, can I use an electrical inverter / variable
frequency drive?
- A) Yes. You can use. Precibalance upgrade kit is a
completely shielded unit immune to electrical noises generated by inverter
drives. You need not do any special work of shielding etc.
- Q) Can I use a local computer?
- A) Yes. You can use any computer operating with
Windows 98/XP.
- Q) What is the configuration of the computer needed?
- A) A basic package with serial port is preferable.
You can also use computers with USB port using a replicator.
- Q) Can I use the existing RPM sensor and pickups /
force sensors?
- A) Though technically it is possible, we will not be
able to guide you in calibration since, we will not have information of your
pickups, their condition. So, the Precibalance dynamic balancing machine upgrade
kit includes tachometers and force sensors as standard supply.
- Q) How do I calibrate the balancing machine?
- A) You need an ISO proving rotor. Either, your
machine is supplied with one or you make one, or buy one from us.
|